Quiz20

Class 11 Geography · Notes

Fundamentals of Physical Geography · Chapter 3

Interior of the Earth: Notes

We cannot see inside the earth, so how do we know what it is made of? This chapter covers the sources of information, earthquakes and seismic waves, the layered structure, volcanoes, and the landforms volcanoes create. Shadow zones, layer depths and intrusive landforms are exam favourites.

In this chapter · 4 sections ▾
  1. 3.1 Sources of information about the interior
  2. 3.2 Earthquakes
  3. 3.3 Structure of the earth
  4. 3.4 Volcanoes and volcanic landforms

3.1 Sources of information about the interior

The earth's radius is about 6,370 km. No one can reach the centre, so knowledge comes from two kinds of sources.

Direct sources

  • Mining: the deepest mines in South Africa go about 3–4 km down.
  • Deep drilling: the Kola Superdeep Borehole (Arctic Ocean side of Russia) reached about 12 km; ocean drilling projects such as the Deep Ocean Drilling Project and the Integrated Ocean Drilling Project sample the sea floor.
  • Volcanic eruptions: magma brings material from depth to the surface for study, though its exact source depth is hard to know.

Indirect sources

  • Temperature, pressure and density all increase with depth.
  • Meteors: made of material similar to the earth's.
  • Gravitation: gravity is greater at the poles than the equator; gravity anomalies show uneven mass distribution in the crust.
  • Magnetic surveys: tell us about magnetic materials in the crust.
  • Seismic activity: the most important source of information.

3.2 Earthquakes

An earthquake is the shaking of the earth caused by a sudden release of energy, usually along a fault, a sharp break in crustal rocks. Rocks along a fault tend to move in opposite directions; when friction finally gives way, the stored energy travels outward as waves.

Focus (hypocentre)

The point inside the earth where the energy is released.

Epicentre

The point on the surface directly above the focus; it feels the waves first.

Earthquake (seismic) waves

WaveTypeTravels throughKey features
P-waves (primary)Body waveSolids, liquids and gasesFastest, arrive first. Like sound waves: particles vibrate parallel to the wave's direction, creating compression and rarefaction (longitudinal).
S-waves (secondary)Body waveOnly solidsArrive after P-waves. Particles vibrate perpendicular to the direction of travel (transverse), creating troughs and crests.
Surface wavesFormed when body waves reach the surfaceAlong the surfaceSlowest, last to arrive, but most destructive: they displace rocks and cause buildings to collapse.

Seismic waves change speed and direction (they reflect and refract) when they pass into material of different density. Recording these changes on seismographs around the world revealed the layers inside the earth.

Shadow zones

Inner core Outer core (liquid) Epicentre 105°105° 145°145° Shadow zone:no P, no S Shadow zone:no P, no S Beyond 145°: only P-waves arrive Up to 105°:P and S arrive
Shadow zones as seen from one epicentre. S-waves never arrive beyond 105° because the liquid outer core blocks them. P-waves are bent by the core and miss the band between 105° and 145°.
  • Within 105° of the epicentre, both P and S-waves are recorded.
  • Beyond 145°, only P-waves arrive.
  • The band between 105° and 145° receives neither: this is the shadow zone. Every earthquake has its own shadow zone.
  • The S-wave shadow zone (everything beyond 105°) covers more than 40% of the earth's surface.

Types of earthquakes

TypeCause
TectonicSliding of rocks along a fault plane. The most common type.
VolcanicLinked to active volcanoes; a special kind of tectonic earthquake.
CollapseRoofs of underground mines collapse in intense mining areas.
ExplosionExplosions of chemical or nuclear devices.
Reservoir-inducedEarthquakes in areas of large reservoirs (e.g., Koyna, Maharashtra, 1967).

Measuring earthquakes

Richter scale: magnitude

Measures the energy released. Expressed in numbers from 0 to 10. Each whole number step is about 10 times larger in ground motion and about 32 times in energy.

Mercalli scale: intensity

Measures the visible damage caused. Ranges from 1 to 12.

Effects of earthquakes

Ground shaking · differential ground settlement · landslides and mudslides · soil liquefaction · ground lurching · avalanches · ground displacement · floods from dam and levee failures · fires · structural collapse · falling objects · tsunami (when the epicentre is under the ocean and the sea floor shifts enough).

3.3 Structure of the earth

Crustoceanic ~5 km · continental ~30 km (up to 70 km under mountains) MantleMoho → 2,900 km · asthenosphere up to ~400 km Outer core2,900 → ~5,100 km · liquid Inner core~5,100 → 6,371 km · solid Core is mainly nickel + iron ("NIFE") surfacecentre
Quarter section of the earth (not to scale for the crust). Density rises with depth, from about 3 g/cm³ in the crust to about 13 g/cm³ at the centre.
LayerDepth / thicknessState and densityNotes
CrustOceanic ~5 km; continental ~30 km; up to ~70 km under the HimalayaSolid, brittle; ~3 g/cm³Oceanic crust is mainly basalt; thinner and denser than continental crust.
MantleFrom the Moho to 2,900 kmSolid but plastic in parts; ~3.4 g/cm³ (upper)Upper part is the asthenosphere (weak, up to ~400 km), the main source of magma.
Outer core2,900 km to ~5,100 kmLiquidBlocks S-waves; its flow generates the earth's magnetic field.
Inner core~5,100 km to the centre (~6,370 km)Solid; ~13 g/cm³ at the centreSolid despite heat, because of immense pressure.

3.4 Volcanoes and volcanic landforms

A volcano is a place where gases, ash and molten rock escape to the surface. Molten rock below the surface is magma; once it reaches the surface it is called lava. Material ejected includes lava flows, pyroclastic debris (rock fragments), volcanic bombs, ash, dust and gases such as nitrogen, sulphur compounds and small amounts of chlorine, hydrogen and argon.

TypeLava / eruptionShapeExample
Shield volcanoFluid basalt; usually not explosive unless water enters the ventLow, broad, gently sloping. The largest volcanoes on earthHawaiian volcanoes
Composite volcanoCooler, more viscous lava (andesite); explosiveSteep cone of alternating lava and pyroclastic layersMt Fuji, Vesuvius
CalderaMost explosive; collapses on itself after eruptionLarge depression (caldera) rather than a tall coneYellowstone, Krakatoa
Flood basalt provincesHighly fluid lava over very large areas; flows can exceed 50 m thickVast plateausDeccan Traps, India
Mid-ocean ridge volcanoesFrequent eruptions along the ridgeUnderwater ridge system over 70,000 km longMid-Atlantic Ridge

Intrusive volcanic landforms

When magma cools inside the crust instead of reaching the surface, it forms intrusive (plutonic) landforms. They are seen at the surface only after the rocks above them erode.

Batholith Laccolith Lapolith Phacolith Sill (horizontal) Dyke (vertical)
Intrusive landforms (simplified). Batholith: huge dome deep in the crust. Laccolith: dome over a pipe. Lapolith: saucer shape. Phacolith: wavy lens in folded rocks. Sill: horizontal sheet. Dyke: vertical wall.
LandformShape and positionRemember
BatholithLarge body of magma cooled deep in the crust, as a big dome; mostly graniteCooled magma chambers; exposed after erosion
LaccolithLarge dome-shaped body with a level base, fed by a pipe from belowLike a surface composite volcano, but buried. Examples in the Karnataka plateau (granite rocks)
LapolithSaucer shape, concave towards the skyLapo = saucer
PhacolithWavy mass at the base of synclines or top of anticlines in folded rocksHas a conduit to the magma chamber
Sill / sheetHorizontal body; thick ones are sills, thin ones sheetsParallel to rock layers
DykeVertical, wall-like, nearly perpendicular to the groundMost common intrusive form in the western Maharashtra area; feeders of the Deccan Traps

Quick check

15 questions on this chapter. Tap an answer to see if it is right and why.

  1. 1.Which of the following is the most important source of information about the earth's interior?

  2. 2.Which of the following are direct sources of information about the earth's interior? 1. Deep drilling 2. Volcanic eruptions 3. Gravity anomalies 4. Meteors

  3. 3.The point on the earth's surface directly above the focus of an earthquake is called the:

  4. 4.Which seismic waves cannot pass through liquids?

  5. 5.Which seismic waves are the most destructive?

  6. 6.The shadow zone of an earthquake, where neither P nor S-waves are recorded, lies between:

  7. 7.In which type of wave do particles vibrate parallel to the direction of wave propagation?

  8. 8.Consider the following statements: 1. The Richter scale measures the intensity of an earthquake based on visible damage. 2. The Mercalli scale ranges from 1 to 12. Which of the statements given above is/are correct?

  9. 9.Earthquakes in the area of the Koyna dam in Maharashtra are an example of:

  10. 10.The mantle extends from the Moho discontinuity to a depth of about:

  11. 11.The asthenosphere is important because:

  12. 12.Which of the following is correctly matched?

  13. 13.The Deccan Traps are an example of:

  14. 14.A saucer-shaped intrusive body of magma, concave towards the sky, is called a:

  15. 15.A vertical, wall-like intrusive igneous body is called a:

0 of 15 answered