Quiz20

Geography notes

Notes · Geography

Sedimentary Rocks

Short, exam-focused revision notes. Read a section, then test yourself with a quiz.

3 min read8 sections

Sedimentary Rocks

Meaning ⭐⭐

  • From Latin sedimentum = settling down.
  • Formed by deposition, compaction and cementation of sediments (mostly in water). Also called stratified or layered rocks.
  • P.G. Worcester (1948): sedimentary rocks are made mainly of fragments of older rocks and minerals, more or less consolidated and arranged in layers.
  • Some form on land: loess, sand-dune rocks, alluvial fans.

Characteristics ⭐⭐⭐

  1. Contain fossils of plants and animals, which help date them.
  1. Cover about 75% of the earth's surface but only about 5% of the crust's volume: important for extent, not depth.
  1. Deposited in sequence: grain size decreases from the shore to the centre of the basin. Cementing agents: silica, iron compounds, calcite, clay.
  1. Have layers (strata); rarely crystalline.
  1. Do not form massive bodies like batholiths or dykes.
  1. Layers are seldom still horizontal: usually folded or faulted.
  1. May be well, poorly or not consolidated.
  1. Joints are usually perpendicular to bedding planes.
  1. Most are porous and permeable (porosity = ratio of voids to total volume).

Structures in sedimentary rocks ⭐⭐

Term
Meaning
Bedding plane
The surface between two beds
Bed
A sedimentary unit over 1 cm thick. Lower surface = sole
Lamina
A unit under 1 cm thick
Cross-bedding
Layers deposited at an angle to the main surface
Mud cracks (sun cracks)
Polygonal cracks in mud dried by the sun
Conformity
Beds deposited continuously without a break
Unconformity
A break in the sequence: deposition stopped for a long time (Collinson and Thompson, 1982)

Types of unconformity ⭐⭐

Type
Meaning
Non-conformity
Sedimentary rocks lie on igneous or metamorphic rocks
Angular unconformity
Horizontal beds lie on folded or tilted older beds
Disconformity
Parallel beds separated by an erosion surface (change of sediment)
Paraconformity
Parallel beds with no visible erosion surface; the gap is shown only by fossils or age

Classification ⭐⭐⭐

A. By nature of sediments

Group
How formed
Examples
Mechanical (clastic)
Fragments of older rocks, transported and deposited
Sandstone, conglomerate, breccia, shale, clay, silt, loess
Chemical
Minerals dissolved in water and precipitated
Gypsum, rock salt
Organic
Remains of plants and animals
Limestone, dolomite, chalk, coal, peat, siliceous rocks

B. By transporting agent

Group
Examples
Aqueous (water; also called argillaceous, as they are often clay-rich)
Marine, lacustrine (lake), riverine (alluvium)
Aeolian (wind)
Loess
Glacial (ice)
Till, moraines

Clastic rocks ⭐⭐

Grain-size scale (Wentworth)

Name
Size (mm)
Boulder
Over 256
Cobble
64–256
Pebble
4–64
Granule
2–4
Sand (very coarse to very fine)
2 to 0.0625
Silt
0.0625 to 0.004
Clay
Under 0.004

Sandstone

  • Sand grains cemented by silica, calcium carbonate, iron oxide or clay.
  • Colour depends on cement: iron oxide → red or brown; calcium carbonate → white or grey. Silica cement makes it very hard.
  • Usually porous; water passes easily.
  • Types: quartz arenite (almost all quartz; Latin arena = sand), arkose (feldspar-rich), lithic arenite (rock fragments), greywacke (quartz, feldspar and rock pieces in a clay matrix).

Conglomerate and breccia ⭐

  • Conglomerate = cemented rounded pebbles and boulders.
  • Breccia = cemented angular fragments (Holmes).

Clay, silt and shale

  • Fine sediments; soft but impermeable. Clay is mostly kaolin; pure clay is white.
  • Shale = consolidated silt and clay in thin, easily split layers. Being impermeable, shale can trap oil below it (as a cap rock).

Chemical rocks

  • Water dissolves soluble minerals from rocks; these later precipitate and harden into gypsum and rock salt.

Organic rocks ⭐⭐

Type
Formed from
Examples
Calcareous
Lime-rich shells and skeletons
Limestone, dolomite, chalk (from microscopic organisms such as foraminifera)
Carbonaceous
Buried plant remains
Peat → lignite → bituminous coal → anthracite (carbon increases); layers = coal seams
Siliceous
Silica from sponges, radiolaria, diatoms
Also geyserite (silica deposited around geysers)

Limestone chemistry ⭐

  • Formation: CaO + H₂O → Ca(OH)₂; Ca(OH)₂ + CO₂ → CaCO₃ + H₂O.
  • Weathering (solution): CO₂ + H₂O → H₂CO₃ (carbonic acid); H₂CO₃ + CaCO₃ → Ca(HCO₃)₂ (soluble), which is carried away.
  • Main minerals: calcite and aragonite. Dolomite = CaMg(CO₃)₂; less soluble than limestone.
  • Limestone is weak in humid climates (dissolves) but resistant in dry climates (uniform texture resists heating and cooling). Its solution forms karst topography.

By transporting agent: details ⭐⭐

  • Marine: well sorted, coarse near the coast to fine offshore: boulders → pebbles → sand → silt → clay → lime. Examples: sandstone, limestone, dolomite, chalk.
  • Lacustrine: lake-floor deposits, seen when the lake dries, is raised, or fills up. Not well sorted.
  • Riverine: river bed and flood plain deposits (alluvium), renewed almost every year.
  • Aeolian: wind-blown deposits. Loess is fine, unstratified, porous, yellowish and lime-rich. It can stand in vertical cliffs.
    • Largest deposits: north China, hundreds of metres thick. The Yellow River (Huang He) gets its colour and huge silt load (about 1.6 billion tonnes a year) from eroding it, hence severe floods.
    • Also seen at Bheraghat (Narmada) near Jabalpur, where loess banks rise 20–25 m.
  • Glacial: glacial drift (till) deposited as moraines.
Moraine
Where deposited
Lateral
Along both sides of a glacier
Medial
In the middle, where two glaciers join and their lateral moraines merge
Ground
Under the glacier, on its bed
Terminal
At the snout (end) where the ice melts