Notes · Science

11 · Photoelectric Effect & Semiconductors

Short, exam-focused revision notes. Read a section, then test yourself with a quiz.

8 min read9 sections

11 · Photoelectric Effect & Semiconductors

📱
Why this chapter matters: every phone, solar panel, LED bulb and computer chip runs on a few grams of cleverly treated silicon. Exams ask short, direct questions here: which element is a semiconductor, which device turns light into electricity, what happens to resistance when you heat it. Learn the materials, the devices and one graph, and you will score easily.
NCERT source map: Class 10 (Sources of Energy: solar cells) · Class 12 Physics (Dual Nature of Radiation and Matter: photoelectric effect) · Class 12 Physics (Semiconductor Electronics: bands, doping, p-n junction, diodes, transistors, logic gates)

📡 Exam radar

What past papers ask in Photoelectric Effect & Semiconductors
What past papers ask in Photoelectric Effect & Semiconductors
The chapter is mostly one-liners. Name the device (LED, solar cell, photodiode, transistor). Name the material (silicon, germanium). Know what heat and doping do. Questions on solar cells come up in almost every state PSC paper.

1. The photoelectric effect

Light knocks electrons out of a metal only above a threshold frequency
Light knocks electrons out of a metal only above a threshold frequency
When light of high enough frequency falls on a metal surface, electrons are knocked out. Einstein explained this in 1905 by treating light as a stream of tiny energy packets called photons, each carrying energy E = hν. He won the Nobel Prize in 1921 for this, not for relativity.
$
  • φ (work function): the minimum energy needed to pull an electron out of that metal.
  • Threshold frequency ν₀: below it, no electrons come out, however bright the light.
  • Brighter light (more intensity) gives more electrons, but not faster ones.
  • Higher frequency gives faster electrons (more kinetic energy).
  • Emission is instant: there is no time delay.
⚠️
Trap (BPSC): "Increasing the intensity of light increases the kinetic energy of emitted electrons" is false. Intensity changes the number of electrons; frequency changes their energy.
Where it is used: solar cells, light meters in cameras, automatic street lights and doors, burglar alarms, and the photoelectric cells once used to read film sound tracks.

2. Conductors, semiconductors and insulators

The energy gap decides whether a material conducts, and heating does opposite things to metals and semiconductors
The energy gap decides whether a material conducts, and heating does opposite things to metals and semiconductors
Type
Energy gap
Examples
Conductivity
Conductor
None (bands overlap)
Copper, silver, aluminium
Very high
Semiconductor
Small (≈ 1 eV)
Silicon (Si), germanium (Ge), gallium arsenide
Between metals and insulators
Insulator
Large (> 3 eV)
Glass, quartz, wood, plastic, rubber
Almost none
  • A semiconductor conducts less than a metal but more than an insulator.
  • Quartz is not a semiconductor (CDS 2017). It is crystalline silicon dioxide, a good insulator.
  • Silicon is the most widely used semiconductor, in transistors, chips and solar cells. Germanium was used in early transistors.
The key temperature fact:
On heating
Resistance
Why
Metal
Increases
Atoms vibrate more and get in the electrons' way
Semiconductor
Decreases
More electrons gain enough energy to jump the gap and carry current
  • At absolute zero (0 K), a pure semiconductor has infinite resistance. It behaves as a perfect insulator.
  • A thermistor uses this sharp change of resistance with temperature, which is why it is used in electronic thermometers (UPPSC).
❄️
Superconductors are different again. Below a critical temperature, their resistance drops to exactly zero. Today this needs very cold conditions (liquid helium or liquid nitrogen). A superconductor that worked at room temperature would be of tremendous economic value, because power could travel through lines with no loss. Uses today: MRI scanners and maglev trains.

3. Doping: making n-type and p-type

A few impurity atoms add spare electrons or holes
A few impurity atoms add spare electrons or holes
Pure (intrinsic) silicon conducts poorly. Adding a tiny amount of impurity, called doping, makes it conduct far better.
ㅤ
n-type
p-type
Impurity added
Group 15: phosphorus, arsenic, antimony (5 outer electrons)
Group 13: boron, aluminium, gallium, indium (3 outer electrons)
Name of impurity
Donor
Acceptor
Majority carriers
Electrons (−)
Holes (+)
  • Silicon doped with aluminium becomes p-type (CDS 2017).
  • Doping lowers resistance; it does not raise it.
  • Electron-hole pairs are created by heat, light or impact. Doping adds only one kind of carrier, so "impurity injection" does not create pairs (MPPSC 2022).

4. The p-n junction and its devices

Join p-type and n-type silicon and you get a diode, the starting point for most devices
Join p-type and n-type silicon and you get a diode, the starting point for most devices
Join p-type and n-type silicon and you get a p-n junction diode. It lets current flow one way only, like a one-way valve.
  • Forward bias (p side to +): the diode conducts.
  • Reverse bias (p side to −): the diode blocks current.
  • Its main job is as a rectifier: it converts AC into DC, as in every phone charger.
Devices that exams ask about:
Device
What it does
LED (Light Emitting Diode)
Electricity → light by electroluminescence. Efficient and long-lasting.
Solar (photovoltaic) cell
Light → electricity, directly. Usually made of silicon.
Photodiode
Detects light; switches ON/OFF very fast. Best for digital uses (optical fibre receivers, remote sensors)
Zener diode
Keeps voltage steady (voltage regulator)
Schottky diode
Ultra-high-speed switching (MPPSC 2022)
Transistor
Amplifier and switch. Types: n-p-n and p-n-p
Thermistor
Electronic thermometer
Integrated circuit (IC)
Millions of transistors on one silicon chip
🔍
Transistor detail (CDS 2016): a bipolar transistor has three regions: emitter, base and collector. The base is the thinnest and the most lightly doped. The emitter is the most heavily doped.
Display technologies:
  • OLED (organic LED): each pixel makes its own light, so no backlight is needed. OLEDs can be made on flexible plastic, can be rolled up, built into clothing, and can be transparent. All three are advantages over LCDs (UPSC 2017).
  • Quantum dots: tiny semiconductor nanocrystals that glow in pure colours; used in QLED TVs. Their discoverers won the 2023 Nobel Prize in Chemistry.

5. Solar cells: light straight into electricity

A solar cell (photovoltaic or PV cell) is a large p-n junction, usually of silicon. When sunlight falls on it, electron-hole pairs are created and pushed apart by the junction, producing a voltage.
  • It converts light energy directly into electrical energy. It is not a dry cell or a Leclanché cell, which are chemical cells.
  • It produces direct current (DC). An inverter is needed to get AC.
  • Artificial satellites get their electricity from solar panels (UPPSC 2014).
  • Output is highest at noon because the Sun's rays fall most directly, so the most light energy falls on each square metre. It is not because the Sun is nearer at noon.
🏛️
UPSC 2014: photovoltaic vs solar thermal
  • Photovoltaics turn light directly into electricity.
  • Solar thermal uses the Sun's heat to boil water and drive a turbine.
  • PV produces DC, not AC, so the statement "PV generates AC" is wrong. India manufactures both technologies.

6. Logic gates: the language of computers

OR, AND and NOT gates with their truth tables
OR, AND and NOT gates with their truth tables
Digital circuits work with just two states: 1 (HIGH) and 0 (LOW). Logic gates combine them.
  • OR gate: output is 1 if any input is 1 (UKPSC 2021).
  • AND gate: output is 1 only if all inputs are 1.
  • NOT gate: output is the opposite of the input.
  • NAND and NOR gates are called universal gates, because any other gate can be built using only one of them.
🧠
Memory hooks
  • "Heat helps semiconductors, hurts metals." Heat makes a semiconductor's resistance fall and a metal's resistance rise.
  • "Five gives N, three gives P." Five outer electrons give n-type; three give p-type.
  • LED gives light; solar cell takes light.
  • Intensity = how many electrons; frequency = how fast.

🧾 60-second revision

  • Photoelectric effect: KE = hν − φ. Nothing is emitted below the threshold frequency. Brighter light gives more electrons; higher frequency gives faster electrons. Einstein, Nobel Prize 1921.
  • Semiconductors: Si, Ge, GaAs. Quartz, plastic and wood are insulators. Conductivity is less than that of metals.
  • On heating: a semiconductor's resistance falls and a metal's rises. At 0 K a pure semiconductor's resistance is infinite.
  • n-type: P, As (group 15), electrons. p-type: B, Al, Ga (group 13), holes.
  • Diode = rectifier (AC → DC). LED works by electroluminescence. A photodiode is best for digital use. Schottky = fastest switching. Zener = voltage regulator. Thermistor = electronic thermometer.
  • Transistor: made mostly of silicon (earlier germanium). The base is thinnest and most lightly doped.
  • Solar cell: light → electricity directly, gives DC, made of silicon, powers satellites, highest output at noon.
  • OLED: flexible, roll-up, transparent displays. Quantum dot = semiconductor nanostructure.
  • OR = any input 1; AND = all inputs 1; NOT = opposite. NAND and NOR are universal gates.

🎯 Quick test

1. What happens to the resistance of a semiconductor when it is heated?
It decreases. More electrons get enough energy to cross the gap and carry current.
2. What is the resistance of a pure semiconductor at absolute zero?
Infinite. It behaves as a perfect insulator.
3. Which of these is not a semiconductor: silicon, germanium, quartz, gallium arsenide?
Quartz. It is an insulator.
4. Pure silicon is doped with aluminium. What type of semiconductor results?
p-type. Aluminium has 3 outer electrons and creates holes.
5. On what principle does an LED work?
Electroluminescence: light is given out when current flows through the p-n junction.
6. Which device converts light energy directly into electrical energy?
The solar (photovoltaic) cell.
7. Does a solar panel produce AC or DC?
DC. An inverter converts it to AC.
8. In the photoelectric effect, what does increasing the intensity of light do?
It increases the number of emitted electrons, not their kinetic energy.
9. Which region of a transistor is the most lightly doped?
The base. It is also the thinnest region.
10. Which diode is used for ultra-high-speed switching?
The Schottky diode.
11. A gate gives output 1 whenever any one input is 1. Which gate is it?
The OR gate.
12. Which device is used as an electronic thermometer?
The thermistor. Its resistance changes sharply with temperature.