Why this chapter matters: Sound questions are short and predictable. Two ideas account for nearly two-thirds of them: where sound travels fastest and what pitch, loudness and quality depend on. Add echo sums, the hearing range and decibels, and you have the whole chapter.
NCERT source map: Class 8 Sound → Class 9 Sound → Class 11 Waves.
📡 Exam radar: what gets asked1. What a wave is2. Speed of sound3. Pitch, loudness & quality4. The hearing range5. Loudness, decibels & noise pollution6. Echo & reflection of sound7. Hearing & sound devices🧾 60-second revision🎯 Quick test (exam-style)
📡 Exam radar: what gets asked
1. What a wave is
A wave carries energy from one place to another without carrying matter. The particles of the medium only vibrate about their own positions.
ㅤ | Longitudinal | Transverse |
Particles vibrate | Along the direction of the wave | At right angles to the wave |
Made of | Compressions and rarefactions | Crests and troughs |
Examples | Sound in air and water, a pushed slinky | Light, ripples on water, a plucked string (sitar) |
- Sound is a mechanical, longitudinal wave in air and liquids. It needs a medium and cannot travel through a vacuum.
- Light is an electromagnetic, transverse wave and needs no medium.
- Wavelength (λ): the distance between two consecutive compressions, or two consecutive crests.
- Frequency (f): the number of waves per second, measured in hertz (Hz). A frequency of 3 Hz means 3 vibrations per second.
- The decibel (dB) is NOT a unit of frequency. It measures loudness.
- Water waves made by a motor boat are both longitudinal and transverse. A sitar string makes stationary, transverse vibrations.
Wave numericals from past papers
- f = 1 kHz, λ = 50 cm → v = 1000 × 0.5 = 500 m/s → 1 km takes 2 s
- f = 4 kHz, λ = 30 cm → v = 1200 m/s → 2.4 km takes 2 s
- f = 4 kHz, λ = 35 cm → v = 1400 m/s → 3 km takes 2.14 s
- 20 crests and 20 troughs in 0.1 s means 20 waves in 0.1 s, so f = 200 Hz → λ = 330/200 = 1.65 m
- 300 Hz wave travels 150 wavelengths → t = 150/300 = 0.5 s (the wavelength cancels out)
2. Speed of sound
Order: solids > liquids > gases. Steel is the usual "fastest" answer. Among liquids, sea water is faster than fresh or distilled water.
Factor | Effect on the speed of sound |
Temperature ↑ | Increases (about 332 m/s at 0 °C, about 343 m/s at 20 °C) |
Humidity ↑ | Increases (moist air is lighter) |
Pressure (at fixed temperature) | No effect |
Frequency or wavelength | No effect: all notes travel at the same speed |
Going from solid to gas | Decreases |
Exam traps
- "The speed of sound in air decreases as humidity increases" is false.
- When sound passes from one medium to another, its frequency stays the same. Speed and wavelength change.
- Astronauts on the Moon can't hear each other directly, because there is no air. They talk by radio, which is an EM wave.
- Lightning is seen before thunder is heard, because light (3 × 10⁸ m/s) is far faster than sound.
- Sound can't pass through a vacuum, even inside a pipe. A hollow wooden pipe placed in a vacuum won't carry it through its hollow middle.
Ear on the rail: a boy with his ear to a rail track hears a distant train or hammer before anyone hears it through the air. Sound travels much faster in steel than in air.
Sonic boom: when a plane flies faster than sound (supersonic, above Mach 1), it makes a shock wave. On the ground, you hear it as a loud bang.
3. Pitch, loudness & quality
Characteristic | Depends on | Everyday example |
Pitch (shrillness) | Frequency | A mosquito's buzz is high-pitched and a lion's roar low-pitched. Women's and children's voices have a higher pitch than men's |
Loudness | Amplitude (measured in decibels) | Hitting a drum harder makes it louder, not higher |
Quality (timbre) | Waveform (the mix of overtones) | You can recognise a friend's voice, or tell a sitar from a flute playing the same note |
- An octave higher means double the frequency. One octave above 500 Hz is 1000 Hz.
- Since frequency and wavelength are linked (v = fλ), you can also say shrillness depends on wavelength: a shorter wavelength gives a higher pitch.
- Tuning a sitar: adjusting the string's tension changes its frequency until it matches the other instruments. That is resonance.
How musical instruments make sound
Type | What vibrates | Examples |
String | A stretched string (stationary transverse waves) | Sitar, veena, violin, guitar |
Wind | An air column inside the instrument | Flute, shehnai, trumpet |
Percussion | A stretched membrane or a solid | Tabla, drum, mridangam, ghatam |
Resonance: when something is pushed at its own natural frequency, its vibration grows very large. That is why soldiers break step while crossing a bridge, and why a singer can shatter a glass. Tuning a radio is also resonance.
4. The hearing range
- Audible range of humans: 20 Hz to 20,000 Hz (20 kHz). It shrinks with age.
- Infrasound (below 20 Hz): produced by earthquakes before the main shock (which is why animals get restless early), and by elephants and whales.
- Ultrasound (above 20,000 Hz): bats (the animal that hears the highest frequencies), dolphins, dogs (dog whistles).
- Ultrasound is made using piezoelectric crystals such as quartz.
Statement trap: "Hearing range is 20 Hz–10 kHz", "sound above 10 kHz is ultrasound" and "earthquakes produce ultrasound first" are all false. The correct figures are 20 kHz, above 20 kHz, and infrasound.
SONAR (SOund Navigation And Ranging) uses ultrasonic waves to find sea depth, submarines, shipwrecks, icebergs and fish.
Doppler effect: the apparent change in frequency when the source and the listener move relative to each other. An approaching train's whistle sounds higher; a departing one sounds lower. It is used in police speed guns, tracking satellites, weather radar and Doppler scans of blood flow.
5. Loudness, decibels & noise pollution
- Loudness and sound intensity, including noise pollution, are measured in decibels (dB). A sound level meter measures them.
- A comfortable level is about 40–60 dB. Long exposure above about 80–85 dB damages hearing, and 120 dB is the threshold of pain.
Permitted noise levels in India (Noise Pollution (Regulation and Control) Rules, 2000):
Area | Day (6 am–10 pm) | Night |
Industrial | 75 dB | 70 dB |
Commercial | 65 dB | 55 dB |
Residential | 55 dB | 45 dB |
Silence zone (around hospitals, schools, courts) | 50 dB | 40 dB |
Good sound insulators: rubber, cork, thermocol and foam.
6. Echo & reflection of sound
- An echo is a reflection of sound. Our ears hold a sound for about 0.1 s, so a clear echo needs a reflecting surface at least about 17 m away.
- Two past-paper sums with the same answer: an echo heard after 5 s at 340 m/s puts the cliff 340 × 5 ÷ 2 = 850 m away. The same applies to a firecracker in front of a cliff.
- Reverberation: sound lingering in a large hall because of repeated (multiple) reflections. Curtains, carpets and acoustic panels reduce it.
- A stethoscope carries a heartbeat to the doctor's ears by multiple reflection of sound inside its tube.
- Uses of reflection: megaphones and horns, curved ceilings and sound boards in auditoriums, whispering galleries (Gol Gumbaz, Vijayapura).
- Bats and dolphins find their way by echolocation.
7. Hearing & sound devices
- Ear: the pinna collects sound → the eardrum vibrates → three tiny bones (hammer, anvil and stirrup, which is the smallest bone in the body) amplify the vibration → the cochlea turns it into nerve signals.
- Microphone: converts sound → electrical signals. Speaker: converts electrical signals → sound.
- TV broadcasts send audio using frequency modulation (FM).
🧾 60-second revision
- Sound is mechanical and longitudinal; it needs a medium; there is none on the Moon
- Speed order: solid > liquid > gas; steel is fastest; it rises with temperature and humidity; pressure and frequency don't affect it
- On changing medium, frequency stays fixed; v = fλ
- Pitch ↔ frequency; loudness ↔ amplitude (dB); quality ↔ waveform (recognising voices)
- Octave = 2× frequency; dB is never a unit of frequency
- Hearing 20 Hz–20 kHz; infrasound comes from earthquakes; ultrasound is used by bats and SONAR (piezoelectric)
- Echo: d = vt/2, and the wall must be at least 17 m away; reverberation and the stethoscope rely on multiple reflection
- Sonic boom means faster than sound; Doppler means the pitch changes with motion (also used to track satellites)
- Silence zone limits: 50 dB by day, 40 dB at night
🎯 Quick test (exam-style)
Try each one first, then open it to check.
Q1. In which medium does sound travel fastest? (a) air (b) water (c) vacuum (d) steel
(d) Steel.
Q2. The pitch of a sound depends on its: (a) amplitude (b) frequency (c) speed (d) intensity
(b) Frequency.
Q3. A sitar and a flute play the same note, yet we can tell them apart because of the difference in: (a) pitch (b) loudness (c) quality (d) speed
(c) Quality (timbre).
Q4. When sound passes from air into water, which quantity remains unchanged? (a) speed (b) wavelength (c) frequency (d) amplitude
(c) Frequency.
Q5. An echo is heard 5 s after a sound is made, with sound travelling at 340 m/s. The reflecting cliff is: (a) 340 m away (b) 850 m away (c) 1700 m away (d) 68 m away
(b) 850 m away. 340 × 5 ÷ 2.
Q6. A sonic boom is produced when the source moves: (a) slower than sound (b) at the speed of light (c) faster than sound (d) in a vacuum
(c) Faster than sound.
Q7. Which of these cannot be a unit of frequency? (a) Hz (b) per second (c) cycles/s (d) dB
(d) dB. It measures loudness.
Q8. SONAR uses: (a) radio waves (b) ultrasonic waves (c) infrared waves (d) X-rays
(b) Ultrasonic waves.
Q9. The note one octave higher than 500 Hz has a frequency of: (a) 250 Hz (b) 750 Hz (c) 1000 Hz (d) 1500 Hz
(c) 1000 Hz.
Q10. In a stethoscope, the heartbeat reaches the doctor's ears by: (a) refraction (b) multiple reflection of sound (c) diffraction (d) interference
(b) Multiple reflection of sound.
Q11. An artificial satellite can be tracked very precisely using the: (a) Raman effect (b) Doppler effect (c) photoelectric effect (d) Tyndall effect
(b) Doppler effect.
Q12. Sound waves in air are: (a) transverse (b) longitudinal (c) electromagnetic (d) both transverse and electromagnetic
(b) Longitudinal.