Notes · Science

02 · Electricity & Magnetism

Short, exam-focused revision notes. Read a section, then test yourself with a quiz.

16 min read15 sections

02 · Electricity & Magnetism

🔌
Why this chapter matters: This is the second most-asked physics topic. The good news: about half the questions are short calculations (bills, bulbs, resistors) that take under 30 seconds once you know 5 formulas. The rest test everyday devices: fuse, motor, generator, transformer and house wiring.
NCERT source map: Class 6–8 Electricity and Circuits / Electric Current and its Effects / Fun with Magnets → Class 10 Electricity and Magnetic Effects of Electric Current → Class 12 Electric Charges and Fields, Current Electricity, Moving Charges and Magnetism, Electromagnetic Induction, Alternating Current.

📡 Exam radar: what gets asked

Power and bills, motors and generators, and magnetism make up half of all questions.
Power and bills, motors and generators, and magnetism make up half of all questions.

1. Electric charge & static electricity

  • Charge comes in two kinds: positive and negative. Like charges repel, unlike charges attract.
  • Charge is conserved: it can't be created or destroyed, only moved. It is quantised: every charge is a whole-number multiple of e = 1.6 × 10⁻¹⁹ C.
  • Rubbing two materials moves electrons from one to the other (charging by friction). This is static electricity.
  • Conductors have many free electrons (metals, the human body, salt water). Insulators don't (rubber, glass, plastic, dry wood). Semiconductors (silicon, germanium) are in between.
  • Electric potential is a scalar. Electric field is a vector. Work done moving a charge: W = qV. So 24 J of work on 2 C means V = 12 V.
  • An electron accelerated through V volts gains energy eV (1 eV = 1.6 × 10⁻¹⁹ J).
🛡️
Charged conductors keep charge on the OUTSIDE. The electric field inside a charged metal shell is zero, and field lines leave the surface at right angles. That is why you're safe inside a car during lightning (a Faraday cage), and why a charged soap bubble swells: the charges on its surface push each other apart.
Static in real life
  • ⚡ Lightning is a giant electric discharge between charged clouds, or between a cloud and the ground. A lightning conductor (a metal rod on top of a building) leads it safely to earth.
  • ✈️ Aircraft tyres are made of conducting rubber. Static charge built up in flight (from air friction) flows to the ground on landing, so there's no spark.
  • Van de Graaff generator: builds up a huge electrostatic charge.

2. Current, voltage & resistance

Quantity
Meaning
Unit
Formula
Current (I)
Flow of charge
ampere (A)
I = Q / t
Voltage (V)
Push behind the charge (potential difference)
volt (V)
V = W / Q
Resistance (R)
Opposition to the flow
ohm (Ω)
R = V / I
Resistivity (ρ)
Resistance of the material itself
ohm-metre (Ω·m)
R = ρL / A

Ohm's law: the most important rule of the chapter

📜
Statement (Georg Simon Ohm, 1827): If the temperature and other physical conditions stay the same, the current (I) through a conductor is directly proportional to the potential difference (V) across its ends.
V ∝ I, so V = IR
What it tells you
  • Double the voltage and the current doubles; halve it and the current halves. The ratio V/I stays fixed.
  • That fixed ratio is the resistance R of the conductor. It measures how much voltage is needed to push 1 ampere through it.
  • 1 ohm (Ω) = 1 volt per ampere. A 10 Ω wire needs 10 V to drive 1 A through it.
  • Picture water in a pipe: voltage = pressure, current = flow, resistance = how narrow the pipe is. More pressure gives more flow, and a narrower pipe gives less.
A conductor that obeys Ohm's law gives a straight V–I line through the origin. Its slope is the resistance.
A conductor that obeys Ohm's law gives a straight V–I line through the origin. Its slope is the resistance.
Ohmic vs non-ohmic
  • Ohmic conductors obey the law, giving a straight V–I line: metal wires such as copper and nichrome, at a steady temperature.
  • Non-ohmic devices don't: bulb filaments (resistance rises as they heat up), diodes, LEDs, transistors and electrolytes.
🧠
Memory triangle: write V on top and I × R below. Cover the one you want:
  • V = I × R
  • I = V ÷ R
  • R = V ÷ I
Past-paper example: a heater draws 0.5 A at 220 V, so R = 220 ÷ 0.5 = 440 Ω. At 120 V it draws I = 120 ÷ 440 ≈ 0.27 A.
⚠️
Exam traps
  • Raising the voltage does not change R. It only raises the current. Resistance depends on the material, length, thickness and temperature.
  • Ohm's law holds only at constant temperature. A filament in series with a fixed resistor heats up, so its resistance rises, the current falls, and the voltage across the fixed resistor drops.
  • R = V/I defines resistance. Ohm's law is the claim that this ratio stays constant.
Current in metals is carried by free electrons. Quick check: 0.6 A for 10 minutes gives Q = 0.6 × 600 = 360 C.
⚠️
Biggest trap of the chapter: Resistivity depends only on the material and temperature, NOT on length or thickness. Stretch or cut a copper wire and its resistance changes, but its resistivity stays the same. Three copper wires of different sizes all have the same resistivity.

Wire tricks (asked again and again)

What you do to the wire
New resistance
Why
Double the length
2R
R ∝ L
Halve the length
R/2 (current doubles)
R ∝ L
Double the diameter (same length)
R/4
Area becomes 4×
Stretch to double length
4R (current becomes ¼)
Length 2× and area ½×
Cut into n equal pieces and join them in parallel
R/n²
50 Ω cut into 5 → 2 Ω
Resistivity ladder (low → high): silver < copper < aluminium < tungsten < nichrome … < glass, rubber. Silver is the best conductor; copper is used in wiring because it is cheaper.
Superconductors have zero resistance below a very low temperature, and they push out magnetic fields completely (they act as perfect diamagnets).
🎨
Resistor colour code: B B ROY of Great Britain had a Very Good Wife = Black 0, Brown 1, Red 2, Orange 3, Yellow 4, Green 5, Blue 6, Violet 7, Grey 8, White 9.
Brown–green–black = 1, 5, ×10⁰ = 15 Ω. At 15 V it draws 1 A.

3. Series & parallel

Series adds up; parallel splits the load. House wiring is always parallel.
Series adds up; parallel splits the load. House wiring is always parallel.
⚡
Solved in seconds (all from past papers)
  • Three 1 Ω resistors in parallel → 1/3 Ω
  • 11 Ω, 22 Ω, 33 Ω in parallel → 1/11 + 1/22 + 1/33 = 11/66 → 6 Ω
  • (5 Ω + 7 Ω) in series = 12 Ω, then in parallel with 36 Ω → (12 × 36)/(12 + 36) = 9 Ω
  • 20 Ω wire cut in half, the halves joined in parallel → 10 ∥ 10 = 5 Ω
  • Two-resistor shortcut: R = (R₁ × R₂)/(R₁ + R₂)
  • For maximum heat or brightest bulbs from a battery, connect in parallel (lowest total resistance, most current).
  • Two identical wires on the same supply: heat in parallel : heat in series = 4 : 1.
  • Appliances at home are in parallel, so each gets the full 220 V and can be switched on and off independently.

4. Electric power, energy & your bill

⚠️
Odd one out: "Which does NOT represent power?" Look for IR² or I²/R. These are wrong. Only VI, I²R and V²/R are correct.
The electricity bill counts energy, not power. Its unit is the kilowatt-hour (kWh), called 1 unit.
🧮
Units = (watts × number of items × hours) ÷ 1000
  • 100 W bulb for 10 h → 1 unit
  • 100 W bulb, 10 h a day for 30 days → 30 units
  • 15 bulbs of 200 W for 24 h → 15 × 200 × 24 ÷ 1000 = 72 units
  • 5 bulbs of 100 W for 20 h → 10 units
  • 5 kW machine, 10 h a day for 30 days → 1500 units; at ₹4 a unit that is ₹6000
  • 250 units → 250 × 3.6 × 10⁶ = 9 × 10⁸ J

Bulb and heater sums

  • Current drawn: I = P/V. A 60 W bulb on 240 V draws 0.25 A.
  • Power from V and I: 220 V × 0.6 A = 132 W; 110 V × 0.2 A = 22 W.
  • Bulb on half voltage: P ∝ V² (R stays fixed), so power drops to ¼. A 220 V, 80 W bulb on 110 V gives 20 W; a 60 W bulb gives 15 W.
  • How many bulbs can a fuse take? 5 A × 220 V = 1100 W → 11 bulbs of 100 W.
  • Heater wire shortened by 10%: R falls to 0.9R, so P = V²/R rises by about 11%.

5. Heating effect: bulbs, heaters & fuses

Current through a resistance produces heat: H = I²Rt (Joule's law, after James Prescott Joule).
Device
Material
Why that material
Bulb filament
Tungsten
Highest melting point of any metal (≈ 3400 °C); bulb filled with inert gas (argon or nitrogen)
Heater, iron, toaster element
Nichrome (nickel + chromium)
High resistivity, high melting point, doesn't oxidise
Fuse wire
Tin–lead alloy
Low melting point, so it melts quickly
Fuse: a safety device placed in series in the live wire. When too much current flows (a short circuit, where current rises enormously, or overloading), the wire heats up and melts, cutting off the supply. It works on the heating effect and the size of the current. Modern homes use an MCB (miniature circuit breaker), which trips instead of melting.
💡
Lighting compared
  • Incandescent bulb: a heated filament glows. Most of the energy is lost as heat; only about 10–20% becomes light.
  • CFL / tube light: mercury vapour gives UV light, which a phosphor coating turns into visible light. The choke gives a high-voltage kick to start the tube.
  • LED: a semiconductor emits light directly. The most efficient and longest-lasting of the three.
  • A candle makes light from chemical energy, not electrical energy.

6. Household wiring & safety

Live, neutral and earth. The fuse sits on the live wire; metal-bodied appliances are earthed.
Live, neutral and earth. The fuse sits on the live wire; metal-bodied appliances are earthed.
Wire
Colour (old → new)
Job
Live
Red → brown
Carries 220 V
Neutral
Black → blue
Return path, 0 V
Earth
Green (or green-yellow)
Safety: leads leaking current to the ground
⚠️
Exam traps
  • Green is EARTH, never live. "A wire with green insulation is the live wire" is false.
  • India's supply is 220 V (rms), 50 Hz AC. The current changes direction 100 times a second, that is every 1/100 s.
  • The fuse goes in the live wire, in series.

7. AC vs DC

One cycle takes 1/50 s, and the direction flips twice in each cycle.
One cycle takes 1/50 s, and the direction flips twice in each cycle.
  • DC (direct current) flows in one direction: cells, batteries, solar panels.
  • AC (alternating current) keeps reversing: the mains supply. A frequency of 3 Hz means 3 cycles per second.
  • Why AC for the grid? Transformers can easily step its voltage up or down, so it can travel long distances with little loss.
  • Capacitor: stores charge; it blocks DC and lets AC pass. Its opposition to AC (reactance) is inversely proportional to frequency. Its capacitance depends on plate area, gap and the material between the plates, not on which metal the plates are made of. Filling the gap with a material of dielectric constant K multiplies C by K.

8. Magnetic effect of current

Oersted (1820): a current-carrying wire deflects a compass needle. Electricity can make magnetism.
A straight wire makes circular field lines; a coil (solenoid) makes a bar-magnet-like field.
A straight wire makes circular field lines; a coil (solenoid) makes a bar-magnet-like field.
  • Right-hand thumb rule: hold the wire with the thumb pointing along the current; your curled fingers show the field direction.
  • The field around a straight wire gets weaker with distance: B ∝ 1/r.
  • Inside a long solenoid, the field lines are straight, parallel and uniform. Put a soft-iron core inside and it becomes an electromagnet (used in cranes, electric bells, MRI).
Properties of magnetic field lines
  • They are closed loops: outside a magnet they go N → S, inside they go S → N. ("Field lines are open curves" is false.)
  • They never cross each other, not even inside a magnet.
  • Where they crowd together, the field is stronger.
  • There are no isolated N or S poles (no magnetic monopoles), so the net magnetic flux through any closed surface is zero (Gauss's law for magnetism).
Force on a moving charge: F = qvB sinθ. It is maximum when the velocity is perpendicular to the field, and zero when parallel. Unit of magnetic field: tesla (T) = N/(A·m).
⚠️
X-rays and gamma rays are NOT deflected by electric or magnetic fields. They are electromagnetic waves with no charge. Alpha and beta particles are deflected because they are charged.

9. Motors, generators & Fleming's rules

Left hand for the motor, right hand for the generator.
Left hand for the motor, right hand for the generator.
ㅤ
Electric motor
Generator / dynamo
Converts
Electrical → mechanical
Mechanical → electrical
Works on
Force on a current in a magnetic field
Electromagnetic induction (Faraday)
Rule
Fleming's LEFT-hand rule
Fleming's RIGHT-hand rule
Used in
Fans, pumps, mixers, EVs
Power stations, cycle dynamo, turbines
Electromagnetic induction (Michael Faraday, 1831): a changing magnetic field through a coil produces (induces) a current.
  • Move the magnet faster → the induced current is larger.
  • Stop the magnet → no current, even if the magnet is very strong.
  • Faraday's law gives the size of the induced current. Lenz's law and Fleming's right-hand rule give its direction.
  • An AC generator uses slip rings. Replace them with a split-ring commutator and it becomes a DC generator. A DC motor also uses a split ring.
Measuring instruments
Instrument
Job
Connected
Resistance
Galvanometer
Detects a small current
—
—
Ammeter
Measures current
In series
Very low
Voltmeter
Measures voltage
In parallel
Very high
A galvanometer becomes an ammeter with a low resistance in parallel (a shunt), and a voltmeter with a high resistance in series.

10. Transformers

More turns gives more voltage but less current. Power in ≈ power out.
More turns gives more voltage but less current. Power in ≈ power out.
  • A transformer works on mutual induction, so it works only on AC.
  • Step-up (more secondary turns): raises voltage at power stations for long-distance lines.
  • Step-down (fewer secondary turns): lowers voltage and raises current. Examples: the mobile phone charger and the transformer on the electricity pole.
  • Why big transformers heat up: current heating in the coils (copper loss), hysteresis loss and eddy currents in the core. Cores are made of thin laminated sheets to cut eddy currents.

11. Magnetic materials & Earth's magnetism

Type
Behaviour in a magnetic field
Examples
Ferromagnetic
Strongly attracted; can be made into magnets
Iron, cobalt, nickel, gadolinium
Paramagnetic
Weakly attracted
Aluminium, platinum, oxygen, Cu²⁺ ions
Diamagnetic
Weakly repelled
Copper, bismuth, silver, gold, water, superconductors
Quick check: plastic, carbon, aluminium and ordinary stainless steel are none of them attracted to a magnet in any noticeable way.
Earth is a giant magnet. At any place, its field is described by:
  • Declination: the angle between geographic north and magnetic north.
  • Inclination (dip): the angle the field makes with the horizontal. It is 90° at the magnetic poles and 0° at the magnetic equator.

12. Current through liquids & batteries

  • Solutions of acids, bases and salts conduct because they contain free ions. Acids conduct because of H⁺ ions. Salt water, lemon juice and orange juice all conduct.
  • Sugar solution, alcohol and pure distilled water do not conduct well (no free ions).
  • EMF of a cell is the work done per unit charge by the cell, measured when no current is drawn.
  • Lithium-ion batteries (EVs, phones): the cathode uses lithium, nickel, cobalt (and manganese); the anode is graphite.

🧾 60-second revision

📌
  • V = IR; R = ρL/A; P = VI = I²R = V²/R; H = I²Rt; 1 unit = 1 kWh = 3.6 × 10⁶ J
  • Resistivity depends on the material only; stretching to 2× length gives 4R
  • Series adds (R up); parallel divides (R down); house wiring is parallel
  • Bulb on half voltage gives ¼ the power
  • Tungsten = filament; nichrome = heater; tin–lead = fuse (low melting point)
  • Fuse in the live wire; green = earth; India 220 V, 50 Hz
  • Motor = electrical → mechanical (left hand); generator = mechanical → electrical (right hand)
  • Faraday = induction; split ring = DC; transformer = AC only; phone charger = step-down
  • Ammeter: series, low R. Voltmeter: parallel, high R. Galvanometer detects
  • Field lines: closed loops, never cross; dip = 90° at the poles; X-rays are not deflected

🎯 Quick test (exam-style)

Try each one first, then open it to check.
Q1. A 100 W bulb is used 10 hours a day for 3 days. Energy used? (a) 0.3 unit (b) 3 units (c) 30 units (d) 300 units
(b) 3 units. 100 × 10 × 3 ÷ 1000 = 3 kWh.
Q2. Which does NOT represent electrical power? (a) VI (b) I²R (c) V²/R (d) IR²
(d) IR².
Q3. A wire of resistance 10 Ω is stretched to double its length. The current from the same cell becomes: (a) double (b) half (c) one-fourth (d) unchanged
(c) One-fourth. The resistance becomes 4× (40 Ω).
Q4. The length of a copper wire is doubled. Its resistivity: (a) doubles (b) halves (c) becomes 4× (d) stays the same
(d) Stays the same. Resistivity is a property of the material.
Q5. A 220 V, 60 W bulb is run on 110 V. Its power will be: (a) 60 W (b) 30 W (c) 15 W (d) 120 W
(c) 15 W. Half the voltage gives ¼ of the power.
Q6. A fuse works on the: (a) magnetic effect (b) chemical effect (c) heating effect (d) lighting effect of current
(c) Heating effect. The fuse wire melts when the current is too large.
Q7. A dynamo converts: (a) electrical → mechanical (b) mechanical → electrical (c) chemical → electrical (d) heat → electrical
(b) Mechanical → electrical, by electromagnetic induction.
Q8. A mobile phone charger is a: (a) step-up transformer (b) step-down transformer (c) generator (d) inverter
(b) Step-down transformer. It lowers 220 V AC to a few volts.
Q9. Which law does NOT tell you the direction of a field or induced current? (a) Fleming's right-hand rule (b) right-hand thumb rule (c) Lenz's law (d) Faraday's law of induction
(d) Faraday's law gives only the size of the induced current.
Q10. At the Earth's magnetic poles, the angle of dip is: (a) 0° (b) 45° (c) 60° (d) 90°
(d) 90°. A dip needle stands vertical there.
Q11. An X-ray beam can be deflected by: (a) an electric field only (b) a magnetic field only (c) both (d) neither
(d) Neither. X-rays carry no charge.
Q12. Aircraft tyres are made of conducting rubber mainly to: (a) reduce weight (b) grip the runway (c) prevent sparks from static charge on landing (d) absorb shock
(c) Prevent sparks. Static charge from air friction flows safely to the ground.