Quiz20

Class 11 Geography · Notes

Fundamentals of Physical Geography · Chapter 5

Geomorphic Processes: Notes

The earth's surface is shaped by two opposing sets of forces: internal forces that build up relief, and external forces that wear it down. This chapter explains both, with weathering, mass movements and soil formation in detail. Expect questions on the types of chemical and physical weathering, the classification of mass movements, and soil-forming factors.

In this chapter · 7 sections ▾
  1. 5.1 Endogenic and exogenic forces
  2. 5.2 Endogenic processes
  3. 5.3 Exogenic processes and denudation
  4. 5.4 Weathering
  5. 5.5 Mass movements
  6. 5.6 Erosion and deposition
  7. 5.7 Soil formation

5.1 Endogenic and exogenic forces

Endogenic forces

  • Come from inside the earth.
  • Energy: radioactivity, rotational and tidal friction, and primordial heat left from the earth's origin.
  • They are land-building forces: they raise or lower parts of the crust and create relief.

Exogenic forces

  • Act on the surface from outside.
  • Energy: the sun's heat (through the atmosphere) and gradients created by tectonic uplift; gravity pulls materials downslope.
  • They are land-wearing forces: they wear down relief and fill basins.
Geomorphic processes Endogenicenergy from inside the earth Exogenicenergy from the sun + gradients Diastrophism • Orogeny (mountain building) • Epeirogeny (continent building) • Earthquakes • Plate tectonics Volcanism • Intrusive forms• Extrusive forms Build up relief: raise and lower parts of the crust Denudation 1. Weathering chemical · physical · biological 2. Mass movements slow · rapid · landslides 3. Erosion & transportation water · ice · wind · waves 4. Deposition Wear down relief: level the surface (gradation) The two groups work against each other all the time.
The two groups of geomorphic processes. Endogenic processes build relief; exogenic (denudation) processes wear it down.

5.2 Endogenic processes

Diastrophism

All processes that move, elevate or build up portions of the crust are grouped under diastrophism.

ProcessWhat happens
OrogenyMountain building through severe folding, affecting long, narrow belts of the crust
EpeirogenyUplift or warping of large parts of the crust: continent building
EarthquakesLocal, relatively minor movements
Plate tectonicsHorizontal movements of crustal plates

In orogeny the crust is severely deformed into folds. In epeirogeny there may be simple deformation. Together these produce faulting, fracturing and folding of rocks.

Volcanism

Volcanism is the movement of molten rock (magma) onto or towards the earth's surface, and the formation of many intrusive and extrusive volcanic forms. (Volcanism is a process; a volcano is the landform. See Chapter 3.)

5.3 Exogenic processes and denudation

Exogenic processes get their energy from the atmosphere, which in turn depends on the sun. Stress (force per unit area) develops in rocks through gravity and molecular changes, and when it exceeds the rock's strength, rocks break, deform or slide. Temperature changes, crystallisation and the melting of minerals also cause molecular stress.

Exogenic processes vary from place to place because climate varies. Temperature and precipitation decide which processes dominate. Within one climate, the effect also depends on the type and structure of rocks, vegetation, slope, and so on.

5.4 Weathering

The type and depth of weathering depend on geology, climate, topography and vegetation.

Chemical weathering

Rocks decompose through chemical reactions. Water and air (oxygen and carbon dioxide), with heat, speed up all of these reactions.

ProcessHow it worksExample / effect
SolutionSoluble minerals dissolve in water or acidsNitrates, sulphates and potassium dissolve; salts in rocks are removed
CarbonationCarbon dioxide in water forms carbonic acid, which dissolves carbonatesCalcium and magnesium carbonates in limestone dissolve, forming caves (karst)
HydrationChemical addition of water to minerals; the minerals expandCalcium sulphate + water → gypsum; expansion causes flaking and granular disintegration. The process is reversible
OxidationMinerals combine with oxygenIron turns red, brown or yellow (rusting)
ReductionOxygen is removed when rocks lie below the water table or in stagnant waterIron turns greyish or greenish

Physical (mechanical) weathering

Rocks break into pieces without any change in their chemistry. Most physical weathering is caused by thermal expansion and pressure release, and it is irreversible.

ProcessHow it works
Unloading and expansionErosion removes overlying rock, the pressure is released, and the rock expands and cracks into sheets parallel to the surface (exfoliation sheets)
Temperature changes and expansionDaily heating and cooling makes the outer layers expand and contract more than the inner parts, so they peel off. Common in hot deserts
Freezing, thawing and frost wedgingWater in cracks freezes and expands about 9%, widening the cracks. Common at high altitudes and in mid-latitudes with frequent freeze–thaw
Salt weatheringSalt crystals grow in pores and cracks, pushing grains apart. Common in arid areas. Sodium chloride, sodium sulphate and calcium sulphate are typical salts

Biological weathering

Living things also break rocks and change their environment:

  • Burrowing animals such as earthworms, termites and rodents expose fresh surfaces and mix materials.
  • Plant roots exert pressure and widen cracks.
  • Decaying plants and animals produce humic and carbonic acids that speed up chemical weathering.
  • Algae and lichens use mineral nutrients and hold moisture on rock surfaces.

Special effects: exfoliation

Exfoliation is the peeling off of curved sheets from rocks. It is a result, not a process: it can be caused by unloading, by temperature changes, or by chemical weathering. It produces smooth rounded exfoliation domes and tors (rounded rocky outcrops on hilltops).

Significance of weathering

  • It breaks rocks into smaller fragments and prepares the ground for soil formation, erosion and mass movements.
  • Biodiversity depends on the depth of the weathering mantle (the layer of weathered material).
  • It concentrates valuable ores: when rocks weather, some materials are removed, and ores of iron, manganese, aluminium and copper become enriched in the residue. Bauxite (aluminium ore) is a classic example of residual concentration.

5.5 Mass movements

Mass movements are not counted as erosion, even though material shifts from one place to another.

What triggers mass movements

  • Removal of support from below, for example by undercutting.
  • Increase in the gradient and height of slopes.
  • Overloading, by natural addition of material or by human activity.
  • Overloading and lubrication from heavy rainfall and saturation.
  • Earthquakes, explosions or machinery vibrations.
  • Excessive natural seepage, or heavy drawdown of water from lakes, reservoirs and rivers.
  • Indiscriminate removal of natural vegetation.

Types of mass movements

Mass movements can be heave (heaving due to frost growth), flow or slide. By speed, they fall into three groups:

slow fast SLOW MOVEMENTS Creepsoil/rock moves slowly on gentle slopes sign: bent trees, tilted fence posts Solifluctionwater-saturated soil flows slowly; moist temperate / thawing frozen ground RAPID MOVEMENTS (wet) Earthflowsaturated clay/silt on low slopes Mudflowbare slopes + heavy rain; also from volcanic ash (lahars) Debrisavalanchehumid areas, steep narrow tracks; faster than mudflow LANDSLIDES (relatively dry) Slumpslips with backward rotation Debris slideslides without backward rotation Rocksliderock masses slide along joints/faults Rock fallblocks fall freely from steep slopes
Mass movements arranged from slowest to fastest: slow movements, rapid wet movements, and landslides.
GroupTypeKey features
SlowCreepVery slow; on moderately steep, soil-covered slopes. Seen from bent trees and tilted fence posts and poles
SlowSolifluctionSlow flow of water-saturated soil or debris. Common in moist temperate areas and where deeply frozen ground thaws at the surface
RapidEarthflowWater-saturated clayey or silty material moving down low-angle terraces or hillsides
RapidMudflowThick mixture of earth and water on bare slopes after heavy rain. Volcanic mudflows (lahars) occur along the slopes of volcanoes
RapidDebris avalancheIn humid regions, on steep narrow tracks; much faster than mudflow, similar to a snow avalanche
LandslideSlumpOne or several units of rock debris slip with a backward rotation
LandslideDebris slideRapid sliding of earth debris without backward rotation
LandslideRockslideIndividual rock masses slide down bedding, joint or fault surfaces
LandslideRock fallRock blocks fall freely from a steep slope, keeping away from it

5.6 Erosion and deposition

  • Erosion is the main reason the land surface is worn down (degradation).
  • Running water is the most important erosional agent in humid regions; wind in hot dry areas; waves and currents along coasts; glaciers in cold regions; groundwater in limestone (karst) areas.
  • Deposition follows erosion: when an agent loses speed, it drops its load. Deposition builds up the land (aggradation). It is the consequence of erosion, so the same agents are responsible.

Weathering

Happens in situ. Little or no movement of material.

Mass movement

Movement under gravity directly; no transporting medium needed.

Erosion

Material is picked up and carried by an agent such as water, ice or wind.

5.7 Soil formation

How soil forms

  1. Weathering breaks the parent rock into a loose layer called regolith. Weathering is the basic first step.
  2. Organisms such as bacteria, lichens and mosses colonise the weathered material.
  3. Dead remains of organisms accumulate as humus.
  4. Grasses, ferns and later bushes and trees grow; their roots and burrowing animals open up the soil further.
  5. Over time, distinct layers (horizons) develop and a mature soil forms.

Five soil-forming factors

FactorRole
Parent materialA passive control factor. Soil depends on the rock it forms from (texture, chemistry), and on transported deposits
TopographyA passive factor. Steep slopes have thin soil (erosion); flat uplands have thick soil; lowlands get deposited soil
ClimateAn active factor. Moisture and temperature decide the rate of weathering and the movement of soil components
Biological activityAn active factor. Adds organic matter, retains moisture, fixes nitrogen
TimeA passive factor. The longer the time, the more mature the soil

Climate and soil: key processes

  • Eluviation: downward washing of soil components such as clay and minerals, in wet climates.
  • Illuviation: deposition of these components in a lower horizon.
  • In dry climates, evaporation exceeds precipitation. Water moves upward and leaves salts at the surface: calcification (calcium carbonate) or salinisation (salts) forms a hard crust (hardpan).
  • In humid tropics, intense bacterial activity breaks down dead matter quickly, so there is little humus. In cold climates, bacterial growth is slow, so humus builds up, forming peat.
  • Rhizobium bacteria in the root nodules of leguminous plants fix nitrogen.

Quick check

16 questions on this chapter. Tap an answer to see if it is right and why.

  1. 1.Which of the following are endogenic processes? 1. Orogeny 2. Epeirogeny 3. Weathering 4. Volcanism

  2. 2.Epeirogeny refers to:

  3. 3.The term 'denudation' includes:

  4. 4.Dissolution of limestone by carbonic acid is an example of:

  5. 5.The red colour of many weathered rocks and soils is mainly due to:

  6. 6.Calcium sulphate taking in water to form gypsum is an example of:

  7. 7.Salt weathering is most common in:

  8. 8.Consider the following statements about exfoliation: 1. It is a process of weathering, not a result. 2. It can produce exfoliation domes and tors. Which of the statements given above is/are correct?

  9. 9.Weathering helps in the concentration of which of the following ores?

  10. 10.Which of the following statements about mass movements is correct?

  11. 11.Bent tree trunks and tilted fence posts on a hillside are signs of:

  12. 12.Arrange the following mass movements from slowest to fastest: 1. Debris avalanche 2. Creep 3. Mudflow

  13. 13.Slipping of rock debris with a backward rotation is called:

  14. 14.Which of the following are active factors of soil formation?

  15. 15.Downward washing of soil components such as clay from upper layers is called:

  16. 16.According to the Landslide Atlas of India (2023), which state recorded the highest number of landslides between 1998 and 2022?

0 of 16 answered